CATL Residential Energy Storage System 4.6Kwh Usable Capacity with 90% DoD
    Publish time 2023-07-13 19:35    

CATL Residential Energy Storage System 4.6Kwh Usable Capacity with 90% DoD

Integration Design and Modular Installation

Modular Installation can be handled and installed by single person

Saving 50% installation time:

Installation in half an hour, wiring in one hour

Quick plug connection design, free from on-site wiring

Handled by single person

One module is less than 50kg, which can be handled by single person

Installed by single person

Stacked and installed by single person

Minimum cover:

0.6M*0.25M (0.15 Square meters)

 

Installation Flow

  1. Battery Pack mounted on the wall

  2. Hybrid inverter fixed over the pack

  3. Connect the matched cable between the battery pack and inverter

  4. Connect the cable including the main grid and backup load


CATL Residential Energy Storage System 4.6Kwh Usable Capacity with 90% DoD

CATL Battery Solution Residential Energy Storage System 

Integrated Design & Modular Installation

A 1-phase residential energy storage system is a type of battery storage system that is designed to store excess energy generated by a home's solar panels or other renewable energy sources. The term "1-phase" refers to the type of electrical power that is used in the home. In a 1-phase electrical system, a single alternating current (AC) power line is used to distribute power throughout the home.

 

A typical 1-phase residential energy storage system consists of a battery bank, an inverter, a battery management system (BMS), and a monitoring system. The battery bank stores the excess energy generated by the solar panels, while the inverter converts the DC power from the batteries into AC power that can be used in the home. The BMS ensures that the batteries are charged and discharged safely and efficiently, while the monitoring system provides real-time data on the system's performance.

 

Battery Model/Specifications
Physical
Battery typeLFP (LiFePO4)
Weight54KG
Dimension (W x H x D)540*490*240mm
IP ProtectionIP65
Warranty5 Year Product Warranty,
10 Year Performance Warranty
Electrical
Usable Capacity4.6kwh
Energy Capacity5.12kwh
DC Circuit Breaker125A
Depth of Discharge (DoD)90%
Nominal Voltage51.2V
Operating Voltage Range44.8-56.5V
Internal Resistance<20mΩ
Cycle Life10000cycle
Battery Pack 5.1
Operation
Max. Charge/Discharge Current50A/80A
Rated DC power4096W
Humidity0~95% (No condensation) Humidity
Max. Charge/Discharge Power2825W/4096W
Operating Temperature Range-10 to 50℃ charging
-10 to 50℃ discharging
BMS
Modules ConnectionMax. 4
Capacity100-400Ah
Power Consumption<2W
CommunicationCAN & RS485
Monitoring ParametersSystem voltage, current, cell voltage, cell
temperature, PCBA temperature measurement
Certificate
Safety(Cell)Pack: IEC/EN 62619;UN38.3
Cell: IEC/EN 62619;UN38.3;UL1973
*Maximum 4 battery pack in parallel.
Hybrid Inverter ModelH5000
PV String Input
Max. DC Voltage580V
Nominal Voltage400V
MPPT Voltage Range80V-560V
Start Voltage150V
Number of MPPT Tracker2
Strings Per MPPT Tracker1
Max. Input Current Per MPPT15A
Max. Short-circuit Current Per MPPT18A
AC Output (Grid)
Nominal AC Output Power5000W
Max. AC Apparent Power7360VA(from grid)
Max. AC Output Power5000W
Nominal AC Voltage230Vac
AC Grid Frequency Range50 / 60Hz±5H
Max. Output Current16A
Max. Input Current32A
Power Factor (cosΦ)0.8leading-0.8lagging
THDi<3%
Battery Input
Battery TypeLFP (LiFePO4)
Nominal Battery Voltage48V
Charging Voltage Range40-60V
Max. Charging Current100A
Max. Discharging Current100A
Battery Capacity100-400Ah
Charging Strategy for Li-ion BatteryDepend on the BMS
AC Output (Backup)
Max. Output Apparent Power5000VA
Peak Output Apparent Power6900VA 10sec
Max. Output Current16A
Nominal Output Voltage230V
Nominal Output Frequency50/60Hz
Output THDv (@Linear Load)<3%(Linear Load)
Efficiency
Euro. PV Efficiency97.60%
Max. PV Efficiency97.00%
Protection
DC SwitchBipolar DC Switch (125A/Pole)
Anti-islanding ProtectionYes
Output Over CurrentYes
DC Reverse Polarity ProtectionYes
String Fault DetectionYes
AC/DC Surge ProtectionDC Type II;AC Type III
Insulation DetectionYes
AC Short Circuit ProtectionYes
General Specifications
Dimensions W x H x D540*590*240mm
Weight32kg
Operating Temperature Range-25℃~+60℃
Operation Humidity0~95% (No Condensation)
Cooling TypeNatural Convection
Max. Operation Altitude2000m
Noise (dB)<25
TopologyBattery Isolation
IP ClassIP65
CommunicationRS485/CAN2.0/WIFI/4G
DisplayLCD/APP
Certification & StandardIEC/EN 62109-1&2;IEC/EN61000-6-1;IEC/EN61000-6-2;EN61000-6-3; IEC/EN61000-6-4; IEC/EN61000-3-11;
EN61000-3-12;IEC60529;IEC 60068;IEC61683;IEC62116;IEC61727;EN50549-1;
AS 4777.2;NRS 097;VDE-AR-N-4105;CEI0-21;G98;G99;C10/C11
Remark
*1. Nominal AC output power is 4999W for Australia and 4600W for Germany and South Africa.
*2. Maximum output current is 21.7A for Australia and 20A for Germany and South Africa.

 

FAQ

Q1:What about the warranty?
A:Generally, we offer 1 years warranty,during this period,just feel free to contact our sales team for more details.
Q2:What is your sample policy?
A:We can supply the sample and the sample charge is refundable according to the next order, please contact us for details.
Q3:Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.
Q4:How do you make our business long-term and good relationship?
1)We keep good quality and competitive price to ensure our customers' benefit.
2)We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q5: There are too many questions need to confirm but the above is not mentioned?
A:We would like to answer any of your question, Please send inquiry to us if you need to know about more.
Q6:Can I get a solar generator power station sample?
A:Yes, please leave your contact information and our sales manager will contact you soon.